ClickCease

01606 834 630 | office@gmsafedeck.co.uk

Request a Quote
Menu

Safety decking

Can safety deck be loaded?

G&M Safe Deck has undergone rigorous testing by Lucideon (formerly CERAM – a UKAS accredited testing (0013) and calibration. (0420) UK laboratory) and can be loaded to 2.0kN/m2.

The safety decking panel has been successfully tested for:

  • Uniformly distributed load (UDL) to serviceability load
  • Soft body impact tests in accordance with ACR(M)001:2000 Test for Fragility of Roofing Assemblies
  • Point loads over several test positions through a 100mm x 100mm spreader plate

For more information on G&M Safe Deck’s load testing methodology and data, download our product information sheet here <Link. To G&M Safe Deck – Product Range Testing Data & Information. PDF>.

Do you have half sized panels available?

Yes. G&M Safe Deck Ltd care a great deal about our customers and the support we provide them. Consequently we listen to what our customers want. We were asked by our customers for a Safe Deck half panel they could purchase as a separate item as and when they needed them. As a result of this we have gone into R&D and developed a half panel. The Safe Deck half panel has been tested by a UKAS accredited test centre. Consequently we have testing data which proves the Safe Deck half panel has the same loading capability and characteristics as the standard full size panel.

Can G&M Safe Deck panels be cut to a smaller size?

Yes, the full size panel can be cut in half, thirds, two-thirds or sixths. The Safe Deck panel is designed to be cut down without loss of rigidity or strength. Consequently the panel can be re-used even if it is damaged. Thereby cutting down on waste and loss.